Samsung Galaxy Note 2 LTE GT-N7105 Android 4.3 Root and Myanmar Zawgyi font install

Pre-requisites
1. Install USB Drivers for Galaxy Note 2 on the computer.
2. Enable USB Debugging Mode on the phone. Go to Settings >>More>> About Device. Tap on "Build Number" several times till the message shows "You are now a Developer". Then enable USB debugging by navigating to Settings >>More>> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 %.

 Samsung Galaxy Note 2 Android 4.3 Root 

1.    Download CF-Auto-Root for Galaxy Note 2 N7105 and extract the Zip file: CF-Auto-Root-t0lte-t0ltexx-gtn7105.zip

2.    Download Odin 3.09 and extract the Zip file: Odin3_V3.09.Zip

3.    Now, Switch off your phone and boot Galaxy Note 2 N7105 into Download Mode by pressing and holding the Volume Down+Home+Power buttons together (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.

4.    Run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)

5. Now connect your Galaxy Note 2 N7105 to your computer via USB cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, click on the PDA button and select the CF-Auto-Root-t0lte-t0ltexx-gtn7105.tar.md5 file.
9. Finally, click on the Start button to begin the rooting process, wait few moments.
10. Once completed, you would see “PASS!” message in ID:COM port having green background
11. Your phone should automatically reboot after completion
12. You can now disconnect your phone from computer
13.  If you see message Error “SuperSU” , go to play Store>> update SuperSu.
14. To verify your device is rooted or not, you can download and run the Root Checker App from Google Play Store.
15. Finish

Myanmar Zawgyi font install

1)    Connect your phone to PC by using USB cable.

2)    Download smartzawgyi4.3advanced

3)    Right click on "smartzawgyi4.3advanced" and Extract it.

4)    Right click on “Installer” and Run as administrator.

5)    If you see a message Super User Request on your phone, click on  “Grant”

6)    Your phone will Auto Reboot.

7)    After reboot your phone, you can see Myanmar font on your phone.

 Warning: Before install Myanmar Zawgyi font, Make sure your Window system is 32 bit.